How to reset device?

1. Reset heater, oil heater etc.
   • Long press reset button for 5 seconds until indicator light flashes, representing successful reset;
   • Indicator light quickly flashes (2 times per second), representing quick connect mode;
   • Indicator light slowly flashes (one time per 3 seconds), representing AP mode;
   • Under EZ mode, long press reset button for 5 seconds until indicator light slowly flashes, representing switching to AP mode and vise versa.
2. Reset smart light
   • Turn off light first. Switch light with the steps: Switch on-off-on-off-on (time interval cannot exceed 10 seconds), flashing lights represents successful reset; if no light flashes, please repeat the steps above;
   • Quick light flashes (4 times per second), represent EZ mode;
   • Slow light flashes (2 times per 3 seconds) represent AP mode;
   • Under EZ mode, turn off lights and then switch light with the steps: Switch on-off-on-off-on (time interval cannot exceed 10 seconds). Light begins to slowly flash, representing that it has switched to AP mode and vise versa.